VPN Basics: What Changes After You Connect

This beginner’s VPN guide treats “connecting and verifying” as two separate steps: first, establish a connection through your chosen route; then confirm that the app you care about is actually using it. A successful subscription import only means the client has loaded the configuration. A changed IP address in your browser doesn’t mean your other apps are using the same route.

Traditional VPNs can use a system-level tunnel to handle selected network traffic. Some services also call proxy subscriptions VPNs. Their clients may configure only a system proxy or use a virtual network adapter to handle more traffic. When only a system proxy is enabled, apps that don’t use the proxy settings may still connect directly. Even with a virtual adapter, split-tunneling rules may send some connections direct. Check the traffic-handling mode and the rules that actually match, not just the software’s name.

When traffic uses a remote exit, the destination website will generally see the exit’s public IP address. A site may still identify you through your login session or cookies. A VPN doesn’t replace HTTPS; if your browser shows a certificate warning, don’t ignore it just to complete a test.

Choosing a Plan and Routes

For your first choice, start with the devices and apps you use most. Check that a compatible client is available for your operating system and can read the subscription format the service provides, then compare billing options and routes. If you mainly need video calls, test during your usual meeting hours and on your usual network. Latency in a node list reflects a single test; it doesn’t show call quality, packet loss, or jitter.

Compare plans and routes by how you use them
Usage Check before ordering Verify after connecting
Daily use Monthly data allowance, reset date, and renewal terms. Complete everyday tasks in your usual apps, then check your usage in the dashboard.
Occasional use Check whether data packages expire and how to add more when you run out. Check that only the apps you want are routed through the proxy.
Meetings or online collaboration Check OS compatibility and available routes; don’t treat route labels as performance guarantees. Test calls, screen sharing, or document editing during your work hours.

Using VPNFact’s plans page as an example, monthly subscription data resets each month on the activation date. Data packages remain available until used and never expire. For a subscription, check the allowance for each billing period; for a data package, check the remaining balance. Route descriptions are a separate matter: “direct” generally means the client connects to the service entry point without an extra relay set up by the provider; a relayed route connects to the entry point first, which then forwards traffic. IEPL is an international Ethernet private line. The label typically describes one segment of a route, not an end-to-end dedicated line from your client to the destination website.

Activate a Plan and Import Your Subscription

  1. Choose a plan and check your order. Compare data terms on the plans page, then sign in to the dashboard. If you don’t have an account, VPNFact lets you create one without an email address. Before paying, check the order total and billing period. Once payment is complete, return to the dashboard to confirm your plan status rather than relying on the payment page alone.
  2. Install the client for your platform. Find the right software in Quick Start or the dashboard’s download section. Windows and macOS clients often have separate settings for the system proxy and virtual network adapter. Some Linux clients provide only a local proxy port, which you’ll need to configure in the target app or desktop proxy settings. Android and iOS clients that create a system tunnel will show a system authorization prompt; first confirm which app is requesting access. VPNFact provides its iOS client link only to users with an active plan.
  3. Add and update the configuration. Sign in to the dashboard to get your subscription. In the client, look for “Subscription,” “Configuration,” or “Import from URL,” then paste the link that matches the software and update it. The client must be able to read the subscription format and support the selected node’s protocol. Software that supports Shadowsocks may not read the same subscription, and may not support VLESS or Hysteria2. If no nodes appear after import, check the format and plan status first.
  4. Choose a node and enable traffic handling. Select a route from the imported list and connect, then enable the system proxy or tunnel mode as needed. If only specific apps or domains should use the proxy, choose rule mode and check the client’s rules and connection logs to see which requests will connect directly.

Exit IPs, Routing, and DNS Checks

Before connecting, check your public IP in your usual browser and note it for comparison. After connecting, refresh the same lookup page in the same browser, then check the client’s connection log to see which rule matched the request and which exit it used. If the lookup request is set to connect directly, an unchanged IP is expected; compare using a lookup request you’ve confirmed goes through the proxy instead. If your network supports both IPv4 and IPv6, check each address type actually in use so you don’t verify only one.

Next, open the app you actually want to use and perform an action that makes a network request, such as refreshing an online document. If the client provides connection logs, find the relevant entry by the time of the action and the destination domain. Don’t assume a browser test reflects what another app is doing. If a webpage works but a desktop app isn’t using the proxy, check whether the app uses the system proxy, whether the tunnel handles its traffic, and whether a rule sends it direct.

For DNS checks, compare what you see with your intended setup. If domains that should be resolved through a specified route are still being handled by your local network’s resolver, investigate a DNS leak. First check the client’s DNS settings and routing rules, then see whether your browser’s Secure DNS is configured separately. A test page shows the resolvers it observed; a difference between the resolver’s and exit’s locations alone doesn’t prove there’s a leak.

What success looks like: The target app completes a real task, and its connection log shows the expected route. If you also require a specific DNS resolution path, verify DNS separately. “Connected” in the client is only the starting point for troubleshooting.

How to Troubleshoot Common Issues

  • ✅ Subscription update fails: First make sure your current network can access the internet, then check your plan status and import format. If the configuration was reset, copy the current subscription again from the dashboard.
  • ✅ Nodes are listed, but none connect: Keep the client mode unchanged and test another route from the same subscription. If only certain routes fail, note the route name, time, and error message so you can include them in a support ticket.
  • ✅ Some sites won’t load after connecting: First check whether the request matched the expected rule. If the connection log shows a domain resolution failure, investigate DNS. If the request reached the website but you saw an access restriction, changing DNS may not help.
  • ❌ Don’t change the route, DNS, and traffic-handling mode all at once. Change one setting at a time and repeat the same action. Otherwise, even if the problem goes away, it’s hard to tell which change fixed it.